B.1.2. Current requirements

Table B.2 shows current requirements measured at room temperature and nominal voltage. These measurements include the current drawn by Multi-ICE (approximately 160mA at 3.3V).

The power regulators are all powered from the 5V supply. Interface logic on the board is powered from 3.3V.

Table B.2. Current requirements

Core Tile and IM-LT3 Interface Module1A1A
Integrator/CP, IM-LT1 Interface Module, and one Core Tile1.5A1.5A


The current requirements depend on the test chip used and the application being run.

Copyright © 2004-2011 ARM Limited. All rights reserved.ARM DUI 0273G