4.2. RealView ICE Micro Edition Connection Sequence

To ensure proper RVDK operation, perform the following steps. Refer to your RealView ICE Micro Edition v1.1 User Guide for further information.

  1. Ensure your processor board is powered up.

  2. Connect the RVI-ME to the board using the JTAG interface cable.

  3. Connect the RVI-ME to your PC using a USB cable. Windows may ask you to install a driver for RVI-ME. The driver, RVI-ME.sys, can be found in the root directory of the RVDK CD. Ensure the RVI-ME power indicator is illuminated. If it fails to illuminate, disconnect and reconnect the USB cable.

    If you have any problems connecting your RVI-ME, contact your supplier.

Copyright © 2005, 2006 ARM Limited. All rights reserved.ARM DUI 0276B
Non-Confidential