4.6.1. How to change the board/chip definition

To configure the debug target:

  1. Display the Connection Control window.

    Select the menu option Target → Connect to Target.... The Connection Control window is displayed.

  2. If RealView Debugger is connected to the debug target, click the check box for the target processor so that it is unchecked. This disconnects the debug target.

  3. Select the menu option Target → Connection Properties.... The Connection Properties window is displayed.

  4. In the left-hand pane, select the CONNECTION=connection_name entry, where connection_name is the name of the connection you want to modify.

  5. In the right-hand pane, right-click on the blue *BoardChip_name setting that identifies the current board or processor name that you want to change.

  6. Select the new board or processor name from the context menu. The value of the blue *BoardChip_name setting is updated.

  7. Select the menu option File → Save and Close to save the changes.

  8. Connect to the debug target.

Copyright © 2005, 2006 ARM Limited. All rights reserved.ARM DUI 0276B