2.2. How to test the DSM

Execute the _TESTBENCH.sh executable within the expanded package to check that operation is valid. The DSM is contained within a testbench that is supplied with the package. The script requires that you select a system-installed simulator. You can specify the simulator to use by setting one of the following parameters:

vcs

Selects the VCS simulator.

ius

Selects the Cadence Incisive simulator.

mti

Selects the QuestaSim simulator.

A test that executes correctly prints the following message at the end of the simulation:

DSMINATOR: *** TEST PASSED ***
Copyright © 2005, 2013, 2015 ARM. All rights reserved.ARM DUI 0302D
Non-ConfidentialID080315