RealView Debugger Trace User GuideVersion 4.1
Home > Setting Conditional Tracepoints > Common parameters for setting conditional tracepoints > Tracepoint types

7.2.1. Tracepoint types

The following tracepoint types are available:

Trigger

Sets an explicit trigger point on the selected address.

You can also use the Collect trace... options to specify how the trace is collected when the trigger is hit.

Start Tracing

Starts tracing at the selected address.

Note

This type is available only on the Create Tracepoint dialog box, and only for ETM-based targets.

Stop Tracing

Stops tracing at the selected address.

Note

This type is available only on the Create Tracepoint dialog box.

Trace Instr

Traces instructions only.

Trace Instr and Data

Traces both instructions and data.

ExternalOut1-4

Controls single-bit output signals from the ETM. Up to four signals are available. The ASIC manufacturer determines the availability and usage of these output signals. See your ASIC documentation for details.

The tracepoint type adds the hw_out:"Tracepoint Type=type" qualifier to the CLI command that is generated by RealView Debugger when it sets a tracepoint.

See also

Copyright © 2006-2010 ARM Limited. All rights reserved.ARM DUI 0322F
Non-ConfidentialID102410
PDF file icon  PDF version
Home > Setting Conditional Tracepoints > Common parameters for setting conditional tracepoints > Tracepoint types