The ARM1156T2F-S test chip contains an Embedded Trace
Macrocell (ETM) and Trace connectors are provided on
the CT1156T2F-S. Use the JTAG connector on the baseboard to provide
the JTAG signals that are required for controlling the ETM.
Note
Trace tools using multiplexed trace packets (such as RealView
Trace) require only one Mictor connector (Trace Port A). The CT1156T2F-S supports
both multiplexed (one trace connector) and demultiplexed mode (two
trace connectors). The second connector is present to support trace
tools that use demultiplexed trace packets. The trace size supported
by the connectors is medium (16-bit packets).
For details of the Mictor connector and the Trace port signals
see Trace Connectors.
For more details on using Trace, see the documentation supplied
with your Trace hardware.
PDF version