Files and directories used by AMBA Designer

Table 3 shows the files and directories used by AMBA Designer.

Table 3. Files and directories used by AMBA Designer

Name

Description

Setting

Default location

AMBA_Designer_Prefs.ini

AMBA Designer preferences file

AMBA Designer Preferences dialog

/home/<user>/.ARM/AMBA_Designer/3.0

.conf

AMBA Designer component library

Adding a Component Library .conf file to the preferences

Default Component Library:

$home/<user>/.ARM/AMBA_Designer/3.0/AMBA_Designer_MaxLib.conf 

You define the location of the other .conf files.

Files generated during stitching

Stitching parameters

/home/<user>/.ARM/AMBA_Designer/3.0/Designs/<SysName_RTL>

.xml

Configuration file for batch configuration and RTL generation

You define the location when you save the XML file.

.adg

Project file for a stitched system

-

You define the location when you save the project file.

.xml

IP-XACT file for the stitched system

Stitching parameters

/home/<user>/.ARM/AMBA_Designer/3.0/Designs/<component_name>_RTL/logical/<component_name>/ipxact

.vc

Output VC Verilog file.[a]

Stitching parameters

/home/<user>/.ARM/AMBA_Designer/3.0/<SysName_RTL>/logical/<SysName>/verilog

<SysName>_config

Directory into which AMBA Designer exports configuration files and a render.csh file for the <SysName> system

Stitching parameters

You define the location before stitching the system in AMBA Designer.

For instructions, see Stitching parameters.

render.csh

Script generated by AMBA Designer. You can use it to recreate the stitched system

Stitching parameters

When stitching export is enabled, AMBA Designer creates this script while it creates and populates <SysName>_config with configuration files during stitching.

[a] More than one VC Verilog file is created for interconnects.


Show/hideSee also

Copyright © 2006-2013 ARM. All rights reserved.ARM DUI 0333N
Non-ConfidentialID051113