AMBA Designer tools enable you to create AMBA-compliant systems. AMBA Designer supports CoreLink and CoreSight devices that use AMBA protocols.
AMBA Designer supports IP-XACT versions 1.2 and 1.4.
AMBA Designer supports the following design tasks:
configuring CoreLink and CoreSight devices
generating RTL for the configured devices
optimizing the AMBA interconnects
stitching together interconnects and CoreLink or CoreSight components into an AMBA-compliant system with IP-XACT stitching.
AMBA Designer generates configurations that are compatible across platforms, and can generate the RTL Verilog files and the associated Out Of Box (OOB) testbenches for verifying the RTL.
In the AMBA Designer Canvas, you can configure IP components and use them to create systems using a graphical representation that shows the components, their ports, and the connections between ports.
You can also use AMBA Designer from the command line in batch mode.
See also- Tasks
For requirements, see the AMBA Designer ADR-400 Installation Guide
For information on which protocol an interconnect or device supports, see the Release Note for the IP bundle.
For information about which interconnect and device is compatible with which IP-XACT version, see the AMBA Designer ADR-400 Release Note.
- Reference
- AMBA protocol and AMBA Design Kit documentation
AMBA AXI Protocol Specification (ARM IHI 0022)
AMBA 3 APB Protocol Specification (ARM IHI 0024)
AMBA 3 AHB-Lite Protocol Specification (ARM IHI 0033)
AMBA Design Kit Technical Reference Manual (ARM DDI 0243).
PDF version