Reconfiguring an AMBA 2 or AMBA 3 component

  1. To open the component configuration window, do one of the following:

    • Right-click the component on the Canvas to display the context-sensitive menu and select Design → Reconfigure component.

    • Right-click the component in the Component Window and select Reconfigure component.

  2. Change the parameters as required and select OK.

  3. Right-click the component in the Diagram Window, and select Design → <component_name> RTL Design Flow Manager....

    The RTL Design Flow Manager dialog appears.

  4. Rerun the RTL generation, simulation, and synthesis as required.

  5. To add the reconfigured component to the Component Library, right-click it, and then select Design → Add component to the library.

  6. To make sure that the instances of the component are updated in all open projects in the Canvas, close and reload the projects that contain this component.

    1. Select File → Close from the menu.

    2. Right-click on the background of the Component Window and select Refresh Component List.

    3. To reopen the updated component, drag it from the Component Window onto the Canvas.

      To reopen an existing system, select it from File → Open.

Show/hideSee also

Tasks
Reference
  • For specific configuration information for your chosen component, see the relevant Supplement document to the ARM® AMBA® Designer User Guide.

Copyright © 2006-2013 ARM. All rights reserved.ARM DUI 0333O
Non-ConfidentialID092413