4.4.2. Using Xilinx download tools

There is no dedicated connector for the Xilinx download cable.

Third-party JTAG tools such as the Xilinx parallel cable can be used by connecting them to the 20-way box header on the baseboard. (The 10-way HW-FLYLEAD available from Xilinx enables the Xilinx Parallel Cable IV to connect to the 20-way box header.)


Although third-party tools can be used to program a configuration directly into the FPGA, they cannot program an image into the Flash memory.

Copyright © 2006-2008 ARM Limited. All rights reserved.ARM DUI 0345D