The PL111 CLCD controller in the Northbridge is interfaced to the Digital Visual Interface (DVI) port on the PB11MPCore using on-board components to provide support for both analog and digital displays. See CLCD controller for details.

The digital portion of the interface is provided by a Silicon Image SiI 160 Transition Minimized Differential Signaling (T.M.D.S.) transmitter. The device is VESA compliant, operating in One Pixel/Clock Input/Output mode. DVI resolutions up to XVGA (1024x768) are supported on the PB11MPCore.

The analog portion of the interface is provided by a Texas Instruments THS8134B triple high speed Digital to Analog Converter (DAC). The DAC converts the 8-bit RGB data from the PL111 CLCD controller to analog VGA signals.

The DDC2B portion of the interface is provided by a custom Two-wire Serial Interface (SBCon) implemented the Southbridge. See Two-wire serial bus interface for details.

The physical interface provided by the PB11MPCore is shown in DVI display interface.