2.4.3. Hiding ports

You can hide some of the component ports. This is useful if they are not connected to anything. To hide multiple ports:

  1. Select the component and then select Object Properties from the Object menu.

  2. Click the Ports tab on the dialog.

  3. Click Select All to select all of the ports.

  4. Click Hide selected ports.

  5. Select the boxes next to clk_in and pvbus_m.

  6. Click OK to accept the change, so that all ports except clk_in and pvbus_m are hidden in the Block Diagram view.

If there is only a small number of ports to hide, use the port context menu shown in Figure 2.9. Right click on the port and select Hide Port.

Copyright © 2007-2009 ARM Limited. All rights reserved.ARM DUI 0370H