2.4.4. Moving ports

Move the remaining visible ports in the tutorial system to improve readability:

  1. Move the mouse pointer so that it is over the port that is to be moved. The mouse pointer changes shape to a hand with a pointing finger. This is the move port mouse pointer.

  2. Press and hold the left mouse button down over the port.

  3. While holding down the mouse button, drag the port to the desired location. This can be anywhere along the inner border of the component that is not on top of an existing port. If you select an invalid position, the port returns to its original location.

  4. When the port is in desired position, release the mouse button.

  5. Move the other port so that there is one port on each side of the processor component. The clk_in port must be on the left side.

Copyright © 2007-2010 ARM Limited. All rights reserved.ARM DUI 0370K
Non-ConfidentialID110210