2.12.1. Setting-up a network connection

To setup the network connection:

  1. Close all non-essential applications.

  2. Install the TAP driver and configure it:

    • Access the base location of Fast Model Portfolio, default C:\Program Files\ARM\FastModelPortfolio_X.Y

    • Run ModelNetworking\add_adapter_32.bat for 32-bit Windows.

  3. Select Start → Control Panel → Network Connections and locate the newly-installed TAP device.

  4. Press the Ctrl key to multi-select at least one real ethernet adapter connection.

  5. Right-click and select Bridge Connections.

Note

You only have to perform the above steps once, at the outset.

Copyright © 2007-2010 ARM Limited. All rights reserved.ARM DUI 0370K
Non-ConfidentialID110210