6.4 Using the SerialCharDoubler component in the system

How to insert and use the SerialCharDoubler component in the dual processor system.

Procedure

  1. Remove the connection between the uart1a component and the term1 component.
  2. Add the SerialCharDoubler component to the system.
  3. Connect the serial_out port of the uart1a component to the in port of the SerialCharDoubler component.
  4. Connect the out port of the SerialCharDoubler component to the serial port of the term1 component.
    Figure 6-4 SerialCharDoubler inserted in dual processor system
    SerialCharDoubler inserted in dual processor system

  5. Click the Build button on the toolbar to rebuild the system.
  6. After the compilation is finished, click the Debug button.
  7. Debug the system.
  8. SerialCharDoubler doubles the input characters in the output of the Linux terminal.
    Figure 6-5 Linux booting with SerialCharDoubler component
    Linux booting with SerialCharDoubler component

Related tasks
2.10 Debugging the system
Non-ConfidentialPDF file icon PDF versionARM DUI0370S
Copyright © 2007-2014 ARM. All rights reserved.