9.18 --diag_error=tag[,tag,…]

Sets diagnostic messages that have a specific tag to Error severity.

Syntax

--diag_error=tag[,tag,…]
Where tag can be:

Usage

Diagnostic messages output by the assembler can be identified by a tag in the form of {prefix}number, where the prefix is A.
You can specify more than one tag with this option by separating each tag using a comma. You can specify the optional assembler prefix A before the tag number. If any prefix other than A is included, the message number is ignored.
The following table shows the meaning of the term severity used in the option descriptions:

Table 9-2 Severity of diagnostic messages

Severity Description
Error
Errors indicate violations in the syntactic or semantic rules of assembly language. Assembly continues, but object code is not generated.
Warning
Warnings indicate unusual conditions in your code that might indicate a problem. Assembly continues, and object code is generated unless any problems with an Error severity are detected.
Remark
Remarks indicate common, but not recommended, use of assembly language. These diagnostics are not issued by default. Assembly continues, and object code is generated unless any problems with an Error severity are detected.
Related reference
9.8 --brief_diagnostics, --no_brief_diagnostics
9.19 --diag_remark=tag[,tag,…]
9.21 --diag_suppress=tag[,tag,…]
9.22 --diag_warning=tag[,tag,…]
Non-ConfidentialPDF file icon PDF versionARM DUI0379G
Copyright © 2007, 2008, 2011, 2012, 2014, 2015 ARM. All rights reserved.