10.73 PUSH

Push registers onto a full descending stack.

Syntax

PUSH{cond} reglist
where:
cond
is an optional condition code.
reglist
is a non-empty list of registers, enclosed in braces. It can contain register ranges. It must be comma separated if it contains more than one register or register range.

Operation

PUSH is a synonym for STMDB sp!, reglist. PUSH is the preferred mnemonic.

Note

STMFD is a synonym of STMDB.
Registers are stored on the stack in numerical order, with the lowest numbered register at the lowest address.

Thumb instructions

The following restriction applies to the 16-bit PUSH instruction:
  • reglist can only include the Lo registers and the LR.
The following restrictions apply to the 32-bit PUSH instruction:
  • reglist must not include the SP.
  • reglist must not include the PC.

Restrictions on reglist in ARM instructions

ARM PUSH instructions can have SP and PC in the reglist but these instructions that include SP or PC in the reglist are deprecated in ARMv6T2 and above.

Examples

    PUSH    {r0,r4-r7}
    PUSH    {r2,lr}
Related reference
10.41 LDM
10.72 POP
10.8 Condition code suffixes
Non-ConfidentialPDF file icon PDF versionARM DUI0379G
Copyright © 2007, 2008, 2011, 2012, 2014, 2015 ARM. All rights reserved.