11.31 VSTM (floating-point)

Extension register store multiple.

Syntax

VSTMmode{cond} Rn{!}, Registers
where:
mode
must be one of:
IA
meaning Increment address After each transfer. IA is the default, and can be omitted.
DB
meaning Decrement address Before each transfer.
EA
meaning Empty Ascending stack operation. This is the same as IA for stores.
FD
meaning Full Descending stack operation. This is the same as DB for stores.
cond
is an optional condition code.
Rn
is the ARM register holding the base address for the transfer.
!
is optional. ! specifies that the updated base address must be written back to Rn. If ! is not specified, mode must be IA.
Registers
is a list of consecutive extension registers enclosed in braces, { and }. The list can be comma-separated, or in range format. There must be at least one register in the list.
You can specify S or D registers, but they must not be mixed. The number of registers must not exceed 16 D registers.

Note

VPUSH Registers is equivalent to VSTMDB sp!, Registers.
You can use either form of this instruction. They both disassemble to VPUSH.
Related concepts
4.15 Stack implementation using LDM and STM
Related reference
10.8 Condition code suffixes
Non-ConfidentialPDF file icon PDF versionARM DUI0379G
Copyright © 2007, 2008, 2011, 2012, 2014, 2015 ARM. All rights reserved.