2.2. Setting the configuration switches

Figure 2.1 shows the configuration switches on the baseboard.

Figure 2.1. Location of configuration switches

Location of configuration switches


The function of switches S6 and S8 is determined by the image loaded into the FPGA. The descriptions in this section refer to the standard images supplied with the product.

Switch S8 controls how the baseboard configures itself and the action to take after reset. User switch S6 can be read by an application running on the baseboard. S6 is also used to select options for the Boot Monitor program at power on. S10 selects the image from the configuration flash memories that is loaded into the FPGAs.

Copyright © 2005-2011 ARM Limited. All rights reserved.ARM DUI 0411D