A.11.5. Integrated Logic Analyzer

Figure A.18 shows the signals on the Integrated Logic Analyzer (ILA) connector J19. Use an ILA to debug the baseboard and Logic Tile FPGA designs and software at the same time. For more information, see the documentation supplied with your analyzer. The ChipScope ILA product, for example, is described on the Xilinx web site.

Figure A.18. Integrated logic analyzer connector J19

Integrated logic analyzer connector J19


All signals on the ILA connector have 10kΩ pullup resistors to 3.3V.

Copyright © 2005-2011 ARM Limited. All rights reserved.ARM DUI 0411D