2.2.3. Boot Monitor configuration switch

The Boot Monitor application is typically loaded into the NOR flash memory and selected to run at power on. Follow the instructions in Loading Boot Monitor into NOR flash.

Table 2.4. Default positions for FPGA select switch S10

SwitchDefaultFunction in default position
S6-1OFFA prompt is displayed enabling you to enter Boot Monitor commands after the system is started.
S6-2OFFSTDIO autodetects whether to use UART0 or the debugger console.
S6-4 to S6-8OFFReserved for use by the application

For more detail on Boot Monitor configuration options, see Boot Monitor configuration switches.

Copyright © 2005-2011 ARM Limited. All rights reserved.ARM DUI 0411D