C.2. Installing the CLCD display

To install the CLCD display:

  1. Connect one end of the CLCD expansion cable to the CLCD adaptor board.

  2. Connect the other end of the cable to the baseboard CLCD expansion connector on the enclosure.

  3. If required, program the CLCD control registers SYS_CLCD and SYS_CLCDSER to sequence the power to the LCD display and specify the bit format. See the CLCDC interface.

Figure C.5. CLCD adaptor board connection

CLCD adaptor board connection

Copyright © 2005-2011 ARM Limited. All rights reserved.ARM DUI 0411D
Non-Confidential