2.2.2. FPGA image select switch

The default values for configuration switches S10-1 to S10-4 are listed in Table 2.3. For more information on FPGA configuration, see FPGA configuration.

Table 2.3. Default positions for FPGA select switch S10

SwitchDefaultFunction in default position
S10-1OFF

Tile site 1 FPGA image 1 selected, (image 2 selected if ON).

S10-2OFF

Tile site 2 FPGA image 1 selected, (image 2 selected if ON).

S10-3OFF

Selects baseboard FPGA image in config flash.

00 image 1 at address 0x000000

01 image 2 at address 0x400000

S10-4OFFReserved.

Note

For information on other configuration links and the function of the status LEDs, see Test, configuration, and debug interfaces.

Copyright © 2005-2011 ARM Limited. All rights reserved.ARM DUI 0411D
Non-Confidential