Chapter 4. Programmer’s Reference

This chapter describes the memory map and the configuration registers for the peripherals in the baseboard FPGA. It contains the following sections:

For detailed information on the programming interface for ARM PrimeCell peripherals and controllers, see the appropriate technical reference manual. For the DMA channels, interrupt signals, and release versions of ARM IP, see the section of this chapter that describes the peripheral.

Note

The peripherals and controllers implemented in the baseboard FPGA are in the standard images distributed by ARM Ltd.

You can replace some or all of the logic in the FPGA with your own designs, however, the details of how to do this are beyond the scope of this user guide. The CD includes FPGA HDL and signal definition files that can be used as a basis for custom designs.

Copyright © 2005-2011 ARM Limited. All rights reserved.ARM DUI 0411D
Non-Confidential