Organization

This document is organized into the following chapters:

Chapter 1 Introduction

Read this chapter for an introduction to the baseboard. This chapter shows the physical layout of the board and identifies the main components.

Chapter 2 Getting Started

Read this chapter for a description of how to set up and start using the baseboard. This chapter describes how to connect the add-on boards and how to apply power.

Chapter 3 Hardware Description

Read this chapter for a description of the hardware architecture of the baseboard. This chapter describes the peripherals, clocks, resets, and debug hardware provided by the board.

Chapter 4 Programmer’s Reference

Read this chapter for a description of the baseboard memory map and registers. There is also basic information on the peripherals and controllers present in the platform baseboard.

Appendix A Signal Descriptions

Refer to this appendix for a description of the signals on the connectors.

Appendix B Specifications

Refer to this appendix for electrical, timing, and mechanical specifications.

Appendix C LCD Kits

Refer to this appendix for details of the CLCD display and interface.

Appendix D PCI Backplane and Enclosure

Refer to this appendix for details of the PCI backplane board.

Appendix E PISMO Memory Expansion Boards

Refer to this appendix for details of the memory expansion boards.

Copyright © 2005-2011 ARM Limited. All rights reserved.ARM DUI 0411D
Non-Confidential