3.5.1. Creating a script file

Create a new .cmm file and add any combination of the following commands to it:

To illustrate how each of these commands can be used, an example script file that makes use of each of the three possible commands is shown in Example 3.1:

Example 3.1. A sample script

Register.Set mcr_p15_0_r1_c1_c0_0 0x5007A
Data.LOAD.Binary C:\SymbianROMs\PB1176ARMV6.IMG 0x0
Data.Set 0x00000004  %Long 0x0000ffff 
Data.Set 0x00000008  %Long 0x00003000 
WAIT 12.ms
Register.Set r1 0x12
Copyright © 2007, 2008 ARM Limited. All rights reserved.ARM DUI 0414C