G.4. Upgrading your hardware

Use one of the progcards utilities and the board description (*.brd) files to load configuration images to the FPGA:

progcards_rvi.exe

progcards_rvi.exe uses RealView ICE and the JTAG interface. It runs on a PC host in a DOS window and communicates with the RealView ICE interface box.

See Procedure for progcards_rvi.exe for detailed instructions.

progcards_usb.exe

progcards_usb.exe uses the built-in USB Config port (USB to JTAG interface logic) on the baseboard. A standard USB cable connects the baseboard to the PC running progcards_usb.exe.

See Procedure for progcards_usb.exe for detailed instructions.

Note

The latest version of the RVI firmware can be downloaded from the Technical Support area of the ARM web site.

Copyright © 2008-2011 ARM Limited. All rights reserved.ARM DUI 0417D