A.10. USB interface

USB1 provides an OTG interface and connects through the OTG connector J2 positioned on the front panel of the enclosure. See Figure 3.2 for the location of the connector.

USB2 and USB3 (J14b) provide USB host interfaces and connect through the combined RJ45 and Dual USB Type A connector J14, positioned on the rear panel of the enclosure. See Ethernet interface for details of the combined RJ45 connector (J14a) and Figure 3.3 for the location of the connectors.

Note

For a full description of the USB signals refer to the datasheet for the NXP ISP1761 On-The-Go controller.

Figure A.12 shows the USB connectors and signals.

Figure A.12. USB connectors

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Copyright © 2008-2011 ARM Limited. All rights reserved.ARM DUI 0417D