A.13.2. USB config port

Figure A.16 shows the signals on the USB config connector J12. USBDP and USBDM are the positive and negative USB data signals.

See Figure 3.2 to locate the connector and see Test, configuration, debug and trace interfaces for a description of how the USB debug interface is implemented on the PB-A8.

Figure A.16. USB debug connector

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

Copyright © 2008-2011 ARM Limited. All rights reserved.ARM DUI 0417D