2.3.2. USB config port

The PB-A8 contains custom logic that interfaces the USB config port to the onboard JTAG signals.You can use a PC connected to the custom USB config port connector on the front panel to:

See Figure 3.2 for the location of the USB config connector, and Appendix G Loading FPGA Images for device programming details.

Caution

The baseboard is supplied with the FPGA and PLD images already programmed. Information is provided in Appendix G Loading FPGA Images however, in case of accidental erasure of the FPGA or PLDs.You are advised not to reprogram the FPGA or PLDs with any images other than those provided by ARM.

Copyright © 2008-2011 ARM Limited. All rights reserved.ARM DUI 0417D