6.3. VE model parameters

Table 6.5 lists the VE FVP instantiation time parameters that you can change when you start the model.

The syntax to use in a configuration file is:

motherboard.component_name.parameter=value

Table 6.5. VE model instantiation parameters

Component nameParameterDescriptionTypeValuesDefault
ve_sysregsuser_switches_valueswitch S6 settingIntegersee Switch S60
flashldr_0fnamepath to flash image fileStringvalid filename""
flashldr_1fnamepath to flash image fileStringvalid filename""
mmcp_mmc_filemultimedia card filenameStringvalid filenamemmc.dat
pl111_clcd_0pixel_double_limitsets threshold in horizontal pixels below which pixels sent to framebuffer doubled in size in both dimensionsInteger-0x12c
sp810_sysctrluse_s8indicates whether to read boot_switches_valueBooleantrue or falsefalse
vfs2mountmount point for the host file systemStringdirectory path on host""

Copyright © 2008-2013 ARM. All rights reserved.ARM DUI 0423O
Non-ConfidentialID060613