5.3.7. SGSignal2AMBAPVSignal component

The SGSignal2AMBAPVSignal component converts from Signal to AMBAPVSignal protocols.

Figure 5.11 shows a view of the component in System Canvas.

Figure 5.11. SGSignal2AMBAPVSignal in System Canvas

SGSignal2AMBAPVSignal in System Canvas

This component is written in LISA+.

Ports

Table 5.16 describes the SGSignal2AMBAPVSignal ports.

Table 5.16. SGSignal2AMBAPVSignal ports

NamePort protocolTypeDescription
sg_signal_sSignalSlaveHandles incoming signal state changes.
amba_pv_signal_mAMBAPVSignalMasterOutput master port for connection to top-level AMBAPVSignal master port. Converted signal state changes are sent out through this port.

Additional protocols

The SGSignal2AMBAPVSignal component has no additional protocols.

Parameters

The SGSignal2AMBAPVSignal component has no configuration parameters.

Registers

The SGSignal2AMBAPVSignal component has no registers.

Debug features

The SGSignal2AMBAPVSignal component has no debug features.

Verification and testing

The SGSignal2AMBAPVSignal component has been tested as part of the SystemC Export example systems. These systems can be found in %PVLIB_HOME%\examples\SystemCExport. On Linux, look in the $PVLIB_HOME/examples/SystemCExport directory.

Performance

The SGSignal2AMBAPVSignal component is not expected to significantly affect the performance of a PV system.

Library dependencies

The SGSignal2AMBAPVSignal component has no dependencies on external libraries.

Copyright © 2008-2013 ARM. All rights reserved.ARM DUI 0423O
Non-ConfidentialID060613