5.3.8. AMBAPVSignal2SGSignal component

The AMBAPVSignal2SGSignal component converts from AMBAPVSignal to Signal protocols.

Figure 5.12 shows a view of the component in System Canvas.

Figure 5.12. AMBAPVSignal2SGSignal in System Canvas

AMBAPVSignal2SGSignal in System Canvas

This component is written in LISA+.

Ports

Table 5.17 provides a description of the ports in the AMBAPVSignal2SGSignal component.

Table 5.17. AMBAPVSignal2SGSignal component ports

NamePort protocolTypeDescription
amba_pv_signal_sAMBAPVSignalSlaveInput slave port for connection from top-level AMBAPVSignal slave port.
sg_signal_mSignalMasterHandles outgoing signal state changes. Converted signal state changes are sent out through this port.

Additional protocols

The AMBAPVSignal2SGSignal component has no additional protocols.

Parameters

The AMBAPVSignal2SGSignal component has no configuration parameters.

Registers

The AMBAPVSignal2SGSignal component has no registers.

Debug features

The AMBAPVSignal2SGSignal component has no debug features.

Verification and testing

The AMBAPVSignal2SGSignal component has been tested as part of the SystemC Export example systems. These systems can be found in %PVLIB_HOME%\examples\SystemCExport. On Linux, look in the $PVLIB_HOME/examples/SystemCExport directory.

Performance

The AMBAPVSignal2SGSignal component is not expected to significantly affect the performance of a PV system.

Library dependencies

The AMBAPVSignal2SGSignal component has no dependencies on external libraries.

Copyright © 2008-2013 ARM. All rights reserved.ARM DUI 0423O
Non-ConfidentialID060613