3.3. EB RTSM baseboard parameters

Table 3.2 lists the baseboard instantiation time parameters that you can change when you start the model.

The syntax to use in a configuration file is:

baseboard.component_name.parameter=value

Table 3.2. EB Baseboard Model instantiation parameters

Component nameParameterDescriptionTypeValuesDefault
eb_sysregs_0user_switches_valueswitch S6 settingintegersee Switch S60
eb_sysregs_0boot_switch_valueswitch S8 settingintegersee Switch S80
flashldr_0fnamepath to flash image filestringvalid path""
fnameWritename of flash image filestringvalid filename""
flashldr_1fnamepath to flash image filestringvalid filename""
fnameWritename of flash image filestringvalid filename""
mmcp_mmc_filemultimedia card filenamestringvalid filenamemmc.dat
pl111_clcd_0pixel_double_limitsets threshold in horizontal pixels below which pixels sent to framebuffer are doubled in size in both dimensionsinteger-0x12c
sdram_sizesdram_sizesets the size of the SDRAM on the second installed CoreTileinteger0 to 0x400000000
sp805_watchdog_0simhaltenables or disables the ARM Watchdog Module (SP805)booleantrue or falsefalse
sp810_sysctrluse_s8indicates whether to read boot_switches_valuebooleantrue or falsefalse
vfs2mountname of mount directorystringvalid filename""

Copyright © 2008-2010, 2012 ARM. All rights reserved.ARM DUI 0424G
Non-ConfidentialID100912