ARM® DS-5™ EB FVP Reference Guide

Version 5.19

Table of Contents

About this book
Intended audience
Using this book
Additional reading
Feedback on this product
Feedback on content
1. Introduction
1.1. Introduction to system models
1.2. Introduction to EB FVPs
1.2.1. About the EB and CoreTile hardware
1.2.2. About the EB FVPs
2. Getting Started with EB FVPs
2.1. Starting FVPs
2.2. Configuring FVPs
2.2.1. Setting model configuration options
2.3. Using the CLCD window
2.3.1. Using the EB CLCD window
2.3.2. See also
2.4. Using Ethernet with EB FVPs
2.4.1. Host requirements
2.4.2. Target requirements
2.4.3. Configuring Ethernet
2.4.4. See also
2.5. Using a terminal with a system model
2.5.1. Telnet mode
2.5.2. Raw mode
2.6. Virtual filesystem
2.6.1. See also
2.7. Using the VFS with pre-built FVPs
2.7.1. Mount names
2.7.2. Path names
2.7.3. See also
3. Programmer’s Reference for the EB FVPs
3.1. EB model memory map
3.2. EB model configuration parameters
3.2.1. See also
3.3. EB FVP baseboard parameters
3.3.1. Switch S6
3.3.2. Switch S8
3.4. Ethernet parameters
3.4.1. mac_address parameter
3.5. System controller parameters
3.6. UART parameters
3.7. Terminal parameters
3.8. Visualization parameters
3.9. FVP_EB_Cortex-A8 CoreTile parameters
3.10. Differences between the EB and CoreTile hardware and the models
3.10.1. Features not present in the baseboard model
3.10.2. Restrictions on the processor models
3.10.3. Remapping and DRAM aliasing
3.10.4. Dynamic memory characteristics
3.10.5. Status and system control registers
3.10.6. Generic Interrupt Controller
3.10.7. GPIO2
3.10.8. Timing considerations

Proprietary Notice

Words and logos marked with or are registered trademarks or trademarks of ARM in the EU and other countries, except as otherwise stated below in this proprietary notice. Other brands and names mentioned herein may be the trademarks of their respective owners.

Neither the whole nor any part of the information contained in, or the product described in, this document may be adapted or reproduced in any material form except with the prior written permission of the copyright holder.

The product described in this document is subject to continuous developments and improvements. All particulars of the product and its use contained in this document are given by ARM in good faith. However, all warranties implied or expressed, including but not limited to implied warranties of merchantability, or fitness for purpose, are excluded.

This document is intended only to assist the reader in the use of the product. ARM shall not be liable for any loss or damage arising from the use of any information in this document, or any error or omission in such information, or any incorrect use of the product.

Where the term ARM is used it means “ARM or any of its subsidiaries as appropriate”.

Confidentiality Status

This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license restrictions in accordance with the terms of the agreement entered into by ARM and the party that ARM delivered this document to.

Product Status

The information in this document is final, that is for a developed product.

Revision History
Revision A31 August 2008Release for RealView Development Suite v4.0 Professional, System Generator v4.0 SP1.
Revision B31 December 2008Release for Fast Models 4.1. Added changes related to ARM_RTSM_PATH.
Revision C31 March 2009Release for Fast Models 4.2. Minor changes to text. Added description for device-accurate-tlb parameter.
Revision D30 November 2009Release for models provided by RealView Development Suite v4.0 Professional edition.
Revision E31 May 2010Release for models provided by RealView Development Suite v4.1 Professional edition.
Revision F30 September 2010Release for models provided by RealView Development Suite v4.1 SP1 Professional edition.
Revision G31 October 2012Release for DS-5 version 5.12.
Revision H31 December 2012Release for DS-5 version 5.13.
Revision I31 March 2013Release for DS-5 version 5.14.
Revision J30 June 2013Release for DS-5 version 5.15.
Revision K30 September 2013Release for DS-5 version 5.16.
Revision L31 December 2013Release for DS-5 version 5.17.
Revision M30 June 2014Release for DS-5 version 5.19.
Copyright © 2008-2010, 2012-2014 ARM. All rights reserved.ARM DUI 0424M