ARM DS-5 EB FVP Reference Guide

Version 5.21


Table of Contents

Preface
About this book
Using this book
Typographic conventions
Feedback
Feedback on this product
Feedback on content
1 Introduction
1.1 System model concepts
1.2 EB FVP concepts
1.3 EB FVP composition
2 Getting Started with EB FVPs
2.1 Starting EB FVPs
2.2 Configuring EB FVPs
2.3 EB FVP CLCD window
2.4 Using Ethernet with EB FVPs
2.4.1 Host requirements
2.4.2 Target requirements
2.4.3 Configuring Ethernet
2.5 Using a terminal with a system model
2.5.1 Terminal component in a system model
2.5.2 Installing Telnet on Microsoft Windows 7
2.6 Virtual File System
2.7 Path names for using the VFS with pre-built FVPs
3 Programmer’s Reference for the EB FVPs
3.1 EB model memory map
3.2 EB model configuration parameters
3.2.1 About the EB model configuration parameters
3.2.2 EB FVP baseboard parameters
3.2.3 Ethernet parameters
3.2.4 System controller parameters
3.2.5 UART parameters
3.2.6 Terminal parameters
3.2.7 Visualization parameters
3.2.8 FVP_EB_Cortex-A8 CoreTile parameters
3.3 Differences between the EB and CoreTile hardware and the models
3.3.1 Features not present in the baseboard model
3.3.2 Features partially implemented in the baseboard model
3.3.3 Restrictions on the processor models
3.3.4 Remapping and DRAM aliasing
3.3.5 Dynamic memory characteristics
3.3.6 Status and system control registers
3.3.7 Generic Interrupt Controller
3.3.8 GPIO2
3.3.9 Timing considerations

Release Information

Document History
Issue Date Confidentiality Change
A 31 August 2008 Non-Confidential RealView Development Suite v4.0 Professional, System Generator v4.0 SP1.
B 31 December 2008 Non-Confidential Fast Models v4.1. Added changes related to ARM_RTSM_PATH.
C 31 March 2009 Non-Confidential Fast Models v4.2. Minor changes to text. Added description for device-accurate-tlb parameter.
D 30 November 2009 Non-Confidential RealView Development Suite v4.0 Professional edition.
E 31 May 2010 Non-Confidential RealView Development Suite v4.1 Professional edition.
F 30 September 2010 Non-Confidential RealView Development Suite v4.1 SP1 Professional edition.
G 31 October 2012 Non-Confidential DS-5 v5.12.
H 31 December 2012 Non-Confidential DS-5 v5.13.
I 31 March 2013 Non-Confidential DS-5 v5.14.
J 30 June 2015 Non-Confidential DS-5 v5.15.
K 30 September 2013 Non-Confidential DS-5 v5.16.
L 31 December 2013 Non-Confidential DS-5 v5.17.
M 30 June 2014 Non-Confidential DS-5 v5.19.
N 30 September 2014 Non-Confidential DS-5 v5.20.
O 20 March 2015 Non-Confidential DS-5 v5.21.

Non-Confidential Proprietary Notice

This document is protected by copyright and other related rights and the practice or implementation of the information contained in this document may be protected by one or more patents or pending patent applications. No part of this document may be reproduced in any form by any means without the express prior written permission of ARM. No license, express or implied, by estoppel or otherwise to any intellectual property rights is granted by this document unless specifically stated.
Your access to the information in this document is conditional upon your acceptance that you will not use or permit others to use the information for the purposes of determining whether implementations infringe any third party patents.
THIS DOCUMENT IS PROVIDED “AS IS”. ARM PROVIDES NO REPRESENTATIONS AND NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE DOCUMENT. For the avoidance of doubt, ARM makes no representation with respect to, and has undertaken no analysis to identify or understand the scope and content of, third party patents, copyrights, trade secrets, or other rights.
This document may include technical inaccuracies or typographical errors.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL ARM BE LIABLE FOR ANY DAMAGES, INCLUDING WITHOUT LIMITATION ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF ANY USE OF THIS DOCUMENT, EVEN IF ARM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This document consists solely of commercial items. You shall be responsible for ensuring that any use, duplication or disclosure of this document complies fully with any relevant export laws and regulations to assure that this document or any portion thereof is not exported, directly or indirectly, in violation of such export laws. Use of the word “partner” in reference to ARM’s customers is not intended to create or refer to any partnership relationship with any other company. ARM may make changes to this document at any time and without notice.
If any of the provisions contained in these terms conflict with any of the provisions of any signed written agreement covering this document with ARM, then the signed written agreement prevails over and supersedes the conflicting provisions of these terms. This document may be translated into other languages for convenience, and you agree that if there is any conflict between the English version of this document and any translation, the terms of the English version of the Agreement shall prevail.
Copyright © [2008-2010, 2012-2015], ARM Limited or its affiliates. All rights reserved.
ARM Limited. Company 02557590 registered in England.
110 Fulbourn Road, Cambridge, England CB1 9NJ.
LES-PRE-20349

Confidentiality Status

This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license restrictions in accordance with the terms of the agreement entered into by ARM and the party that ARM delivered this document to.
Unrestricted Access is an ARM internal classification.

Product Status

The information in this document is Final, that is for a developed product.

Web Address

Non-ConfidentialPDF file icon PDF versionARM DUI0424O
Copyright © 2008-2010, 2012-2015 ARM. All rights reserved.