| Copyright © 2007-2011 ARM Limited. All rights reserved. | ARM DUI 0425F |
| Non-Confidential | |
 PDF version | |
| Home > Getting Started > Setting up the PB1176JZF-S |
| |||
| Home > Getting Started > Setting up the PB1176JZF-S | |||
The following items are supplied with the PB1176JZF-S:
the PB1176JZF-S printed-circuit board mounted on a metal tray
an AC power supply that provides a 12VDC output
a CD containing sample programs, Boot Monitor code, FPGA and PLD images, and additional documentation
this user guide.
To set up the PB1176JZF-S as a standalone development system:
Set the configuration switches to select the boot memory device, operating frequency, and FPGA image. See Setting the configuration switches.
If you are using memory expansion boards, connect them to the PB1176JZF-S. See Appendix E Memory Expansion Boards.
If you are using an external display, connect the CLCD cable to the PB1176JZF-S DVI Digital/Analog connector.
If you are using expansion Logic Tiles, mount the tile on the tile expansion site. See Appendix C RealView Logic Tile and the manual for your Logic Tile.
If you are using a debugger, connect to the JTAG debug port on the board. See Connecting JTAG, Trace, and configuration equipment.
If you are using a Trace Port Analyzer (TPA), connect the Trace Port interface buffer board. See Connecting the Trace Port Analyzer.
Apply power to the PB1176JZF-S. See Supplying power.
If you are using the supplied Boot Monitor software to select and run an application, see Appendix F Boot Monitor and platform library.
If you are using the PB1176JZF-S with the PCI backplane, see also Appendix D PCI Backplane and Enclosure.
| Copyright © 2007-2011 ARM Limited. All rights reserved. | ARM DUI 0425F |
| Non-Confidential | |
| PDF version | |
| Home > Getting Started > Setting up the PB1176JZF-S |