RealView Platform Baseboard for ARM1176JZF-S User Guide: Using this book

Using this book

This book is organized into the following chapters:

Chapter 1 Introduction: Read this chapter for an introduction to the PB1176JZF-S. This chapter shows the physical layout of the board and identifies the main components.
Chapter 2 Getting Started: Read this chapter for a description of how to set up and start using the PB1176JZF-S. This chapter describes how to connect the add-on boards and how to apply power.
Chapter 3 Hardware Description: Read this chapter for a description of the hardware architecture of the PB1176JZF-S. This chapter describes the peripherals, clocks, resets, and debug hardware provided by the board.
Chapter 4 Programmer’s Reference: Read this chapter for a description of the PB1176JZF-S memory map and registers. There is also basic information on the peripherals and controllers present on the Platform Baseboard.
Appendix A Signal Descriptions: See this appendix for a description of the signals on the connectors.
Appendix B Specifications: See this appendix for electrical, timing, and mechanical specifications.
Appendix C RealView Logic Tile: See this appendix for information about the optional Logic Tile.
Appendix D PCI Backplane and Enclosure: See this appendix for details of the PCI backplane board.
Appendix E Memory Expansion Boards: See this appendix for details of the memory expansion boards.
Appendix F Boot Monitor and platform library: See this appendix for details on using the supplied Boot Monitor utilities.
Appendix G Boot Monitor Commands: See this appendix for a list of Boot Monitor commands.
Appendix H Loading FPGA Images: See this appendix for details on loading new FPGA images.

Copyright © 2007-2011 ARM Limited. All rights reserved.	ARM DUI 0425F
Non-Confidential
PDF version