7.3.1. Loading on-chip memories

After a Cortex-M1 .axf image file has been built with the RealView MDK, no more steps are necessary if you are using the debugger to load the on-board memories. However, if you want to preload the memories so that they are initialized at power-on, you must create a Hex file that is compatible with the Quartus II tools and use this when you synthesize the design.

For information about how to pre-initialize the Cortex-M1 TCMs, see Application Note 213: Cortex-M1 TCM Initialization.

Copyright © 2008 ARM Limited. All rights reserved.ARM DUI 0430A