8.1.10. Step 10: Create TCM initialization files

You must create initialization files for the Cortex-M1 TCMs in the Quartus II project directory. You can copy itcm.hex from the ExampleDesign directory into your current project directory, or create new TCM initialization files using RealView MDK. See Application Note 213: Cortex-M1 TCM initialization in the ARM Cortex-M1 FPGA Development Kit for information about how to create your own TCM initialization files.

Note

If simulation is required, you must create memory initialization files in the SOPC Builder simulation directory, which is CortexM1_ExampleDesign_sim in the current project.

Copyright © 2008 ARM Limited. All rights reserved.ARM DUI 0430A
Non-Confidential