5.4.2. Open the Wave viewer with Example SOPC System signals

The example SOPC system is supplied with a custom wave file, wave.do, which adds Cortex-M1 signals and signals from other components and the Avalon bus to the waveform display. At the ModelSim prompt type do wave.do to open the wave viewer and display these signals. The signals added by wave.do are useful for observing the bus transactions that are generated by the test software.

Note

Although SOPC Builder generates a default wave file which can be invoked using the w alias, this does not add signals from every component to the waveform display.

Copyright © 2008 ARM Limited. All rights reserved.ARM DUI 0430A
Non-Confidential