5.2. Simulation software description

There is a separate RealView MDK software project that is targeted specifically to the simulation environment. This project, which is provided with source code, can be opened from the file ExampleSoftware\Simulation\SimCode.Uv2.

The simulation software tests are similar to the emulation software tests provided for the FPGA build, with two significant differences:

The simulation software runs through a series of short tests for the following:

Note

The itcm.hex file for the example SOPC system design is automatically placed into the simulation directory by the RealView MDK project. Rebuilding the project replaces the itcm.hex file in the simulation directory.

Copyright © 2008 ARM Limited. All rights reserved.ARM DUI 0430A
Non-Confidential