2.4.2. Initial feedback from the board

The program is executing, and has written some characters to the Cortex-M1 Terminal and is waiting for you to Press any switch to continue… as shown in Figure 2.7. The switches refer to any of the four push button switches on the Cyclone III Starter Board.

Figure 2.7. Cortex-M1 Terminal window awaiting switch press

Cortex-M1 Terminal window awaiting switch press

Press and hold any of the four user switches and wait for the terminal to respond with the menu options to continue to the menu portion of the program. This causes the LEDs to stop flashing, and the program prints a menu to the Cortex-M1 Terminal as shown in Figure 2.8.

Figure 2.8. Cortex-M1 Terminal window with test menu

Cortex-M1 Terminal window with test menu

Copyright © 2008 ARM Limited. All rights reserved.ARM DUI 0430A
Non-Confidential