5.2. CLCD DVI display interface

The CT-R4F DVI combined connector (J4) is shown in Figure 5.2. The digital CLCD data from the PL111 in ARM Cortex-R4F test chip is passed to a T.M.D.S. transmitter to provide the DVI digital data and to a triple video DAC to provide the analogue RGB signals. The DDC2B interface is provided by a custom Two-wire Interface implemented in the CT-R4F PLD.

Note

The mechanical interconnect includes 29 signal contacts, that are divided into two sections. The first section is organized as three rows of eight contacts. The second section contains five signals that are designed specifically for analog video signals. Horizontal Sync, Vertical Sync, R, G, and B are all required for analog implementations.

A fused (1A anti-surge) +5V supply (pin 14) is provided by the CT-R4F.

Figure 5.2. DVI Digital/Analog connector

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


The DVI connector signals are listed in Table 5.5.

Table 5.5. DVI connector signals

PinSignalPinSignalPinSignal
1T.M.D.S. Data2-9T.M.D.S. Data1-17T.M.D.S. Data0-
2T.M.D.S. Data2+10T.M.D.S. Data1+18T.M.D.S. Data0+
3T.M.D.S. Data2/4 Shield11T.M.D.S. Data1/3 Shield19T.M.D.S. Data0/5 Shield
4T.M.D.S. Data4-12T.M.D.S. Data3-20T.M.D.S. Data5-
5T.M.D.S. Data4+13T.M.D.S. Data3+21T.M.D.S. Data5+
6DDC Clock14+5V Power22T.M.D.S. Clock Shield
7DDC Data15Ground (for +5V)23T.M.D.S. Clock+
8Analog Vertical sync16Hot Plug Detect24T.M.D.S. Clock-
C1Analog RedC2Analog GreenC3Analog Blue
C4Analog Horizontal SyncC5Analog Ground (analog R, G, and B return)  

Note

The CT-R4F implements a single link, T.M.D.S. Data 3, 4, and 5 connections are not used.

Copyright © 2009-2011 ARM Limited. All rights reserved.ARM DUI 0441C
Non-ConfidentialID021412