Adding a new configuration database to DS-5

To add a new configuration database to DS-5:

  1. Launch Eclipse.

  2. Select Preferences from Windows menu.

  3. Expand the DS-5 configuration group.

  4. Select Configuration Database.

  5. Click Add... to locate the new database:

    1. Select the entire directory.

    2. Click OK to close the dialog box.

  6. Position the new database:

    1. Select the new database.

    2. Click Up or Down as required.

      Note

      DS-5 provides built-in databases containing a default set of target configurations. You can enable or disable these but not delete them.

  7. Click Rebuild database....

  8. Click OK to close the dialog box and save the settings.

Note

DS-5 processes the databases from top to bottom with the information in the lower databases replacing information in the higher databases. For example, if you want to produce a modified Cortex™-A15 processor definition with different registers then those changes can be added to a new database that resides lower down in the list.

Show/hideSee also

Copyright © 2010-2012 ARM. All rights reserved.ARM DUI 0446K
Non-ConfidentialID071912