Auto Refresh Properties dialog box

The dialog box enables you to modify the update intervals settings.

Refresh Off/Blocked

Enables you to modify the stop/block auto refresh.

Update Interval

Specifies the auto refresh interval in seconds.

Update When

Enables you to specify when you want auto refresh to update:

Running

Refreshes the Memory view while the target is running.

Stopped

Refreshes the Memory view while the target is stopped.

Always

Always refreshes the Memory view.

Note

When using the Running or Always selections, the Memory and Screen views are only updated if the target supports access to that memory when running. For example, some CoreSight™ targets support access to physical memory at any time via the Debug Access Port (DAP) to the Advanced High-performance Bus Access Port (AHB-AP) bridge. In those cases, add the AHB: prefix to the address selected in the Memory or Screen views. This type of access bypasses any cache on the CPU core, so the memory content returned might be different to the value that the core reads.

Figure 76. Auto Refresh properties dialog box

Auto Refresh properties dialog box

Show/hideSee also

Copyright © 2010-2012 ARM. All rights reserved.ARM DUI 0446L
Non-ConfidentialID100912