4.3 Target configuration editor - Memory tab

A graphical view or tabular view that enables you to define the attributes for each of the block of memory on your target. These memory blocks are used to ensure that your debugger accesses the memory on your target in the right way.

Graphical view

In the graphical view, the following options are available:
View by Map Rule
Filter the graphical view based on the selected rule.
View by Address Type
Filter the graphical view based on secure or non-secure addresses. Available only when TrustZone is supported. You can select TrustZone support in the Overview tab.
View by Power Domain
Filter the graphical view based on the power domain. Available only when Power Domain is supported. You can select Power Domain support in the Overview tab.
Add button
Add a new memory region.
Remove button
Remove the selected memory region.

Graphical and tabular views

In both the graphical view and the tabular view, the following settings are available:
Unique Name
Name of the selected memory region (mandatory).
Name
User-friendly name for the selected memory region.
Description
Detailed description of the selected memory region.
Base Address
Absolute address or the Name of the memory region to use as a base address. The default is an absolute starting address of 0x0.
Offset
Offset that is added to the base address (mandatory).
Size
Size of the selected memory region in bytes (mandatory).
Width
Access width of the selected memory region.
Access
Access mode for the selected memory region.
Apply Map Rule (graphical view) Map Rule (tabular view)
Mapping rule to be applied to the selected memory region. You can use the Map Rules tab to create and modify rules for control registers.
More... (tabular view)
In the tabular view, the ... button is displayed when you select More... cell. Click the ... button to display the Context and Parameters dialog box.
Context
Debugger plug-in. If you want to pass parameters to a specific debugger, select a plug-in and enter the associated parameters.
Parameters
Parameters associated with the selected debugger plug-in. Select the required debugger plug-in from the Context drop-down menu to enter parameters for that debugger plug-in.
Figure 4-3 Target configuration editor - Memory tab
Target configuration editor - Memory tab

Mandatory fields are indicated by an asterisk. Toolbar buttons and error messages are displayed in the header panel as appropriate.
Related concepts
4.1 About the Target Configuration Editor
Related tasks
4.9.1 Creating a memory map
4.9.8 Creating a memory region for remapping by a control register
4.9.9 Applying the map rules to the overlapping memory regions
Related reference
4.2 Target configuration editor - Overview tab
4.4 Target configuration editor - Peripherals tab
4.5 Target configuration editor - Registers tab
4.6 Target configuration editor - Group View tab
4.7 Target configuration editor - Enumerations tab
4.8 Target configuration editor - Configurations tab
Non-ConfidentialPDF file icon PDF versionARM DUI0446W
Copyright © 2010-2015 ARM. All rights reserved.