16.6 Running an image

This describes how to run an application image on a target.

Use the Debug Configurations dialog box to set up a connection and define the run control options that you want the debugger to do after connection. To do this select Debug Configurations... from the Run menu.
After connection, you can control the debug session by using the toolbar icons in the Debug Control view.

Prerequisites

Before you can run an image it must be loaded onto the target. An image can either be preloaded on a target or loaded onto the target as part of the debug session.

Note

The files that resides on the target do not have to contain debug information, however, to be able to debug them you must have the corresponding files with debug information on your local host workstation.
Related reference
11.6 Commands view
11.7 Debug Control view
11.38 Debug Configurations - Connection tab
11.39 Debug Configurations - Files tab
11.40 Debug Configurations - Debugger tab
11.42 Debug Configurations - Arguments tab
11.43 Debug Configurations - Environment tab
Related information
DS-5 Debugger commands
Non-ConfidentialPDF file icon PDF versionARM DUI0446W
Copyright © 2010-2015 ARM. All rights reserved.