4.9.8 Creating a memory region for remapping by a control register

Describes how to create a new memory region that can be used for remapping when bit 2 of the control register is set.

Procedure

  1. Click on the Memory tab.
  2. Switch to the table view by clicking on the relevant button in the top corner.
  3. Enter the data as shown in the following figure.
    Figure 4-17 Creating a memory region for remapping by a control register
    Creating a memory region for remapping by a control register

Related tasks
4.9.1 Creating a memory map
4.9.2 Creating a peripheral
4.9.3 Creating a standalone register
4.9.4 Creating a peripheral register
4.9.5 Creating enumerations for use with a peripheral register
4.9.6 Assigning enumerations to a peripheral register
4.9.7 Creating remapping rules for a control register
4.9.9 Applying the map rules to the overlapping memory regions
Related reference
4.9 Scenario demonstrating how to create a new target configuration file
4.3 Target configuration editor - Memory tab
Non-ConfidentialPDF file icon PDF versionARM DUI0446W
Copyright © 2010-2015 ARM. All rights reserved.