15.11.3 Installing the Jython example within Eclipse

Make sure you have Jython installed. To download Jython, and for installation instructions, go to http://www.jython.org/. This document is written with reference to Jython 2.5.3, but later versions should also work.
Make sure you have the PyDev plugin installed into your Eclipse IDE. To download PyDev, and for installation instructions, go to http://pydev.org/. Make sure you configure PyDev to know about the Jython version you have installed.
The example project DTSLPythonExample is in the DTSLExamples.zip file. You can import DTSLPythonExample directly into your Eclipse workspace. You must also import DTSL.zip into your Eclipse workspace. After importing them, change the project configuration to refer to your DTSL library location:
  1. Select the DTSLPythonExample within the Eclipse Project Explorer, right click it, and select Properties.
  2. Select 'PyDev – PYTHONPATH' from the properties list.
  3. Click the String Substitution Variables tab.
  4. Replace the DTSL variable value with the path to your DTSL library location.
The example project also contains two launch configurations for running the program. One configuration uses the DS-5 configdb board specification, and the other refers directly to the files in the configdb. The project contains a configdb extension, which contains the Keil MCBSTM32 entries compatible with this project.

Note

If you use your own Eclipse (non DS-5) installation, then you must set the DS-5 installation location within the DS-5 preferences. This value is used within the provided launch configurations.
The readme.txt file contained within the project has more information.
Related reference
15.1 Additional DTSL documentation and files
Non-ConfidentialPDF file icon PDF versionARM DUI0446W
Copyright © 2010-2015 ARM. All rights reserved.